3-way merge of amnezia-vpn/amneziawg-go (AWG2, I1-I5 CPS + S4 keepalive) into
sagernet/wireguard-go@506b763185 (the base sing-box uses). Keeps sagernet's
sing-box-compat additions (Send offset contract, InputPacket, conn reserved/
control) and neutralizes the encapsulating headroom (MessageEncapsulatingTransportSize=0)
so obfuscation composes cleanly. Obfuscation lives in device/ (obf*.go, magic-header.go
new files + send/receive/device/uapi grafts); conn/tun/ipc kept pure sagernet.
LIVE-VALIDATED: handshake + keepalive + traffic against a real AmneziaWG 2.0 server.
Keepalive packets were excluded from S4 padding because the padding
logic was nested inside the dataSent guard. The receiving side
(DeterminePacketTypeAndPadding) expects S4 padding on all transport
packets, so unpadded keepalives fail H4 header validation and are
silently dropped.
This prevents the responder from completing key confirmation —
lastHandshakeNano stays 0 until real data flows through the tunnel.
(cherry picked from commit 7c2acadba17cadf8a1df957c49e1333130d460ad)
(cherry picked from commit a7bac1754e7717e1d4009d1ffd2d13330067d631)
(cherry picked from commit 7a2f11c693b49e784318bbf987173095c67b563d)
Peer.SetEndpointFromPacket is not called per-packet. It is
guaranteed to be called at least once per packet batch.
Updates tailscale/corp#30042
Updates tailscale/corp#20732
Signed-off-by: Jordan Whited <jordan@tailscale.com>
To be implemented by [magicsock.lazyEndpoint], which is responsible for
triggering JIT peer configuration.
Updates tailscale/corp#20732
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
It was previously suppressed if roaming was disabled for the peer.
Tailscale always disables roaming as we explicitly configure
conn.Endpoint's for all peers.
This commit also modifies PeerAwareEndpoint usage such that wireguard-go
never uses/sets it as a Peer Endpoint value. In theory we (Tailscale)
always disable roaming, so we should always return early from
SetEndpointFromPacket(), but this acts as an extra footgun guard and
improves clarity around intended usage.
Updates tailscale/corp#27502
Updates tailscale/corp#29422
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The sync.Locker used with a sync.Cond must be acquired when changing
the associated condition, otherwise there is a window within
sync.Cond.Wait() where a wake-up may be missed.
Fixes: 4846070 ("device: use a waiting sync.Pool instead of a channel")
Reviewed-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This enables a conn.Bind to bring its own encapsulating transport, e.g.
VXLAN/Geneve.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This is already enforced in receive.go, but if these unmarshallers are
to have error return values anyway, make them as explicit as possible.
cherry picked from commit WireGuard/wireguard-go@842888ac5c
Updates tailscale/corp#28879
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
There is a possible deadlock in `device.Close()` when you try to close
the device very soon after its start. The problem is that two different
methods acquire the same locks in different order:
1. device.Close()
- device.ipcMutex.Lock()
- device.state.Lock()
2. device.changeState(deviceState)
- device.state.Lock()
- device.ipcMutex.Lock()
Reproducer:
func TestDevice_deadlock(t *testing.T) {
d := randDevice(t)
d.Close()
}
Problem:
$ go clean -testcache && go test -race -timeout 3s -run TestDevice_deadlock ./device | grep -A 10 sync.runtime_SemacquireMutex
sync.runtime_SemacquireMutex(0xc000117d20?, 0x94?, 0x0?)
/usr/local/opt/go/libexec/src/runtime/sema.go:77 +0x25
sync.(*Mutex).lockSlow(0xc000130518)
/usr/local/opt/go/libexec/src/sync/mutex.go:171 +0x213
sync.(*Mutex).Lock(0xc000130518)
/usr/local/opt/go/libexec/src/sync/mutex.go:90 +0x55
golang.zx2c4.com/wireguard/device.(*Device).Close(0xc000130500)
/Users/martin.basovnik/git/basovnik/wireguard-go/device/device.go:373 +0xb6
golang.zx2c4.com/wireguard/device.TestDevice_deadlock(0x0?)
/Users/martin.basovnik/git/basovnik/wireguard-go/device/device_test.go:480 +0x2c
testing.tRunner(0xc00014c000, 0x131d7b0)
--
sync.runtime_SemacquireMutex(0xc000130564?, 0x60?, 0xc000130548?)
/usr/local/opt/go/libexec/src/runtime/sema.go:77 +0x25
sync.(*Mutex).lockSlow(0xc000130750)
/usr/local/opt/go/libexec/src/sync/mutex.go:171 +0x213
sync.(*Mutex).Lock(0xc000130750)
/usr/local/opt/go/libexec/src/sync/mutex.go:90 +0x55
sync.(*RWMutex).Lock(0xc000130750)
/usr/local/opt/go/libexec/src/sync/rwmutex.go:147 +0x45
golang.zx2c4.com/wireguard/device.(*Device).upLocked(0xc000130500)
/Users/martin.basovnik/git/basovnik/wireguard-go/device/device.go:179 +0x72
golang.zx2c4.com/wireguard/device.(*Device).changeState(0xc000130500, 0x1)
cherry picked from commit WireGuard/wireguard-go@12269c2761
Updates tailscale/corp#28879
Signed-off-by: Martin Basovnik <martin.basovnik@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Only bother updating the rxBytes counter once we've processed a whole
vector, since additions are atomic.
cherry picked from commit WireGuard/wireguard-go@542e565baa
Updates tailscale/corp#28879
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Introduce an optional extension point for Endpoint that enables a path
for WireGuard to inform an integration about the peer public key that is
associated with an Endpoint.
The API is expected to return either the same or a new Endpoint in
response to this function. A future version of this patch could
potentially remove the returned Endpoint, but would require larger
integrator changes downstream.
This adds a small per-packet cost that could later be removed with a
larger refactor of the wireguard-go interface and Tailscale magicsock
code, as well as introducing a generic bound for Endpoint in a device &
bind instance.
Updates tailscale/corp#20732
The sync.Locker used with a sync.Cond must be acquired when changing
the associated condition, otherwise there is a window within
sync.Cond.Wait() where a wake-up may be missed.
Fixes: 4846070 ("device: use a waiting sync.Pool instead of a channel")
Signed-off-by: Jordan Whited <jordan@tailscale.com>
There is a possible deadlock in `device.Close()` when you try to close
the device very soon after its start. The problem is that two different
methods acquire the same locks in different order:
1. device.Close()
- device.ipcMutex.Lock()
- device.state.Lock()
2. device.changeState(deviceState)
- device.state.Lock()
- device.ipcMutex.Lock()
Reproducer:
func TestDevice_deadlock(t *testing.T) {
d := randDevice(t)
d.Close()
}
Problem:
$ go clean -testcache && go test -race -timeout 3s -run TestDevice_deadlock ./device | grep -A 10 sync.runtime_SemacquireMutex
sync.runtime_SemacquireMutex(0xc000117d20?, 0x94?, 0x0?)
/usr/local/opt/go/libexec/src/runtime/sema.go:77 +0x25
sync.(*Mutex).lockSlow(0xc000130518)
/usr/local/opt/go/libexec/src/sync/mutex.go:171 +0x213
sync.(*Mutex).Lock(0xc000130518)
/usr/local/opt/go/libexec/src/sync/mutex.go:90 +0x55
golang.zx2c4.com/wireguard/device.(*Device).Close(0xc000130500)
/Users/martin.basovnik/git/basovnik/wireguard-go/device/device.go:373 +0xb6
golang.zx2c4.com/wireguard/device.TestDevice_deadlock(0x0?)
/Users/martin.basovnik/git/basovnik/wireguard-go/device/device_test.go:480 +0x2c
testing.tRunner(0xc00014c000, 0x131d7b0)
--
sync.runtime_SemacquireMutex(0xc000130564?, 0x60?, 0xc000130548?)
/usr/local/opt/go/libexec/src/runtime/sema.go:77 +0x25
sync.(*Mutex).lockSlow(0xc000130750)
/usr/local/opt/go/libexec/src/sync/mutex.go:171 +0x213
sync.(*Mutex).Lock(0xc000130750)
/usr/local/opt/go/libexec/src/sync/mutex.go:90 +0x55
sync.(*RWMutex).Lock(0xc000130750)
/usr/local/opt/go/libexec/src/sync/rwmutex.go:147 +0x45
golang.zx2c4.com/wireguard/device.(*Device).upLocked(0xc000130500)
/Users/martin.basovnik/git/basovnik/wireguard-go/device/device.go:179 +0x72
golang.zx2c4.com/wireguard/device.(*Device).changeState(0xc000130500, 0x1)
Signed-off-by: Martin Basovnik <martin.basovnik@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Only bother updating the rxBytes counter once we've processed a whole
vector, since additions are atomic.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Peer.RoutineSequentialReceiver() deals with packet vectors and does not
need to perform timer and endpoint operations for every packet in a
given vector. Changing these per-packet operations to per-vector
improves throughput by as much as 10% in some environments.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Access to Peer.endpoint was previously synchronized by Peer.RWMutex.
This has now moved to Peer.endpoint.Mutex. Peer.SendBuffers() is now the
sole caller of Endpoint.ClearSrc(), which is signaled via a new bool,
Peer.endpoint.clearSrcOnTx. Previous Callers of Endpoint.ClearSrc() now
set this bool, primarily via peer.markEndpointSrcForClearing().
Peer.SetEndpointFromPacket() clears Peer.endpoint.clearSrcOnTx when an
updated conn.Endpoint is stored. This maintains the same event order as
before, i.e. a conn.Endpoint received after peer.endpoint.clearSrcOnTx
is set, but before the next Peer.SendBuffers() call results in the
latest conn.Endpoint source being used for the next packet transmission.
These changes result in throughput improvements for single flow,
parallel (-P n) flow, and bidirectional (--bidir) flow iperf3 TCP/UDP
tests as measured on both Linux and Windows. Latency under load improves
especially for high throughput Linux scenarios. These improvements are
likely realized on all platforms to some degree, as the changes are not
platform-specific.
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Peer.RoutineSequentialReceiver() deals with packet vectors and does not
need to perform timer and endpoint operations for every packet in a
given vector. Changing these per-packet operations to per-vector
improves throughput by as much as 10% in some environments.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Access to Peer.endpoint was previously synchronized by Peer.RWMutex.
This has now moved to Peer.endpoint.Mutex. Peer.SendBuffers() is now the
sole caller of Endpoint.ClearSrc(), which is signaled via a new bool,
Peer.endpoint.clearSrcOnTx. Previous Callers of Endpoint.ClearSrc() now
set this bool, primarily via peer.markEndpointSrcForClearing().
Peer.SetEndpointFromPacket() clears Peer.endpoint.clearSrcOnTx when an
updated conn.Endpoint is stored. This maintains the same event order as
before, i.e. a conn.Endpoint received after peer.endpoint.clearSrcOnTx
is set, but before the next Peer.SendBuffers() call results in the
latest conn.Endpoint source being used for the next packet transmission.
These changes result in throughput improvements for single flow,
parallel (-P n) flow, and bidirectional (--bidir) flow iperf3 TCP/UDP
tests as measured on both Linux and Windows. Latency under load improves
especially for high throughput Linux scenarios. These improvements are
likely realized on all platforms to some degree, as the changes are not
platform-specific.
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: Jordan Whited <jordan@tailscale.com>
GRO requires big allocations to be efficient. This isn't great, as there
might be Android memory usage issues. So we should revisit this commit.
But at least it gets things working again.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
