gvisor-lx/pkg/xdp/xdp.go
Leadaxe 2c4ae3b0a4 snapshot: sagernet/gvisor v0.0.0-20250811.0-sing-box-mod.1
Содержимое пина, зафиксированного в go.mod sing-box-lx, одним коммитом
без истории. Полная история SagerNet/gvisor — 1.45 ГБ и клонируется в
каждой CI-джобе; наша дельта — одна вставка в одну функцию, история для
неё не нужна.

Module path github.com/sagernet/gvisor сохранён намеренно: на него
опирается replace-директива суперпроекта.

Патч поверх — отдельным коммитом, чтобы дельта читалась одним git show
и переносилась на новый пин копированием.

SPECS/TASKS/048-GVISOR_HANDSHAKE_NIL_CRASH
2026-08-04 15:50:08 +03:00

323 lines
10 KiB
Go

// Copyright 2022 The gVisor Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
//go:build amd64 || arm64
// +build amd64 arm64
// Package xdp provides tools for working with AF_XDP sockets.
//
// AF_XDP shares a memory area (UMEM) with the kernel to pass packets
// back and forth. Communication is done via a number of queues.
// Briefly, the queues work as follows:
//
// - Receive: Userspace adds a descriptor to the fill queue. The
// descriptor points to an area of the UMEM that the kernel should fill
// with an incoming packet. The packet is filled by the kernel, which
// places a descriptor to the same UMEM area in the RX queue, signifying
// that userspace may read the packet.
// - Transmit: Userspace adds a descriptor to TX queue. The kernel
// sends the packet (stored in UMEM) pointed to by the descriptor.
// Upon completion, the kernel places a descriptor in the completion
// queue to notify userspace that the packet is sent and the UMEM
// area can be reused.
//
// So in short: RX packets move from the fill to RX queue, and TX
// packets move from the TX to completion queue.
//
// Note that the shared UMEM for RX and TX means that packet forwarding
// can be done without copying; only the queues need to be updated to point to
// the packet in UMEM.
package xdp
import (
"fmt"
"math/bits"
"github.com/sagernet/gvisor/pkg/cleanup"
"github.com/sagernet/gvisor/pkg/log"
"github.com/sagernet/gvisor/pkg/memutil"
"golang.org/x/sys/unix"
)
// A ControlBlock contains all the control structures necessary to use an
// AF_XDP socket.
//
// The ControlBlock and the structures it contains are meant to be used with a
// single RX goroutine and a single TX goroutine.
type ControlBlock struct {
UMEM UMEM
Fill FillQueue
RX RXQueue
TX TXQueue
Completion CompletionQueue
}
// Opts configure an AF_XDP socket.
type Opts struct {
NFrames uint32
FrameSize uint32
NDescriptors uint32
Bind bool
UseNeedWakeup bool
}
// DefaultOpts provides recommended default options for initializing an AF_XDP
// socket. AF_XDP setup is extremely finnicky and can fail if incorrect values
// are used.
func DefaultOpts() Opts {
return Opts{
NFrames: 4096,
// Frames must be 2048 or 4096 bytes, although not all drivers support
// both.
FrameSize: 4096,
NDescriptors: 2048,
}
}
// New returns an initialized AF_XDP socket bound to a particular interface and
// queue.
func New(ifaceIdx, queueID uint32, opts Opts) (*ControlBlock, error) {
sockfd, err := unix.Socket(unix.AF_XDP, unix.SOCK_RAW, 0)
if err != nil {
return nil, fmt.Errorf("failed to create AF_XDP socket: %v", err)
}
return NewFromSocket(sockfd, ifaceIdx, queueID, opts)
}
// NewFromSocket takes an AF_XDP socket, initializes it, and binds it to a
// particular interface and queue.
func NewFromSocket(sockfd int, ifaceIdx, queueID uint32, opts Opts) (*ControlBlock, error) {
if opts.FrameSize != 2048 && opts.FrameSize != 4096 {
return nil, fmt.Errorf("invalid frame size %d: must be either 2048 or 4096", opts.FrameSize)
}
if bits.OnesCount32(opts.NDescriptors) != 1 {
return nil, fmt.Errorf("invalid number of descriptors %d: must be a power of 2", opts.NDescriptors)
}
var cb ControlBlock
// Create the UMEM area. Use mmap instead of make([[]byte) to ensure
// that the UMEM is page-aligned. Aligning the UMEM keeps individual
// packets from spilling over between pages.
var zerofd uintptr
umemMemory, err := memutil.MapSlice(
0,
uintptr(opts.NFrames*opts.FrameSize),
unix.PROT_READ|unix.PROT_WRITE,
unix.MAP_PRIVATE|unix.MAP_ANONYMOUS,
zerofd-1,
0,
)
if err != nil {
return nil, fmt.Errorf("failed to mmap umem: %v", err)
}
cleanup := cleanup.Make(func() {
memutil.UnmapSlice(umemMemory)
})
if sliceBackingPointer(umemMemory)%uintptr(unix.Getpagesize()) != 0 {
return nil, fmt.Errorf("UMEM is not page aligned (address 0x%x)", sliceBackingPointer(umemMemory))
}
cb.UMEM = UMEM{
mem: umemMemory,
sockfd: uint32(sockfd),
frameAddresses: make([]uint64, opts.NFrames),
nFreeFrames: opts.NFrames,
frameMask: ^(uint64(opts.FrameSize) - 1),
}
// Fill in each frame address.
for i := range cb.UMEM.frameAddresses {
cb.UMEM.frameAddresses[i] = uint64(i) * uint64(opts.FrameSize)
}
// Check whether we're likely to fail due to RLIMIT_MEMLOCK.
var rlimit unix.Rlimit
if err := unix.Getrlimit(unix.RLIMIT_MEMLOCK, &rlimit); err != nil {
return nil, fmt.Errorf("failed to get rlimit for memlock: %v", err)
}
if rlimit.Cur < uint64(len(cb.UMEM.mem)) {
log.Infof("UMEM size (%d) may exceed RLIMIT_MEMLOCK (%+v) and cause registration to fail", len(cb.UMEM.mem), rlimit)
}
reg := unix.XDPUmemReg{
Addr: uint64(sliceBackingPointer(umemMemory)),
Len: uint64(len(umemMemory)),
Size: opts.FrameSize,
// Not useful in the RX path.
Headroom: 0,
// TODO(b/240191988): Investigate use of SHARED flag.
Flags: 0,
}
if err := registerUMEM(sockfd, reg); err != nil {
return nil, fmt.Errorf("failed to register UMEM: %v", err)
}
// Set the number of descriptors in the fill queue.
if err := unix.SetsockoptInt(sockfd, unix.SOL_XDP, unix.XDP_UMEM_FILL_RING, int(opts.NDescriptors)); err != nil {
return nil, fmt.Errorf("failed to register fill ring: %v", err)
}
// Set the number of descriptors in the completion queue.
if err := unix.SetsockoptInt(sockfd, unix.SOL_XDP, unix.XDP_UMEM_COMPLETION_RING, int(opts.NDescriptors)); err != nil {
return nil, fmt.Errorf("failed to register completion ring: %v", err)
}
// Set the number of descriptors in the RX queue.
if err := unix.SetsockoptInt(sockfd, unix.SOL_XDP, unix.XDP_RX_RING, int(opts.NDescriptors)); err != nil {
return nil, fmt.Errorf("failed to register RX queue: %v", err)
}
// Set the number of descriptors in the TX queue.
if err := unix.SetsockoptInt(sockfd, unix.SOL_XDP, unix.XDP_TX_RING, int(opts.NDescriptors)); err != nil {
return nil, fmt.Errorf("failed to register TX queue: %v", err)
}
// Get offset information for the queues. Offsets indicate where, once
// we mmap space for each queue, values in the queue are. They give
// offsets for the shared pointers, a shared flags value, and the
// beginning of the ring of descriptors.
off, err := getOffsets(sockfd)
if err != nil {
return nil, fmt.Errorf("failed to get offsets: %v", err)
}
// Allocate space for the fill queue.
fillQueueMem, err := memutil.MapSlice(
0,
uintptr(off.Fr.Desc+uint64(opts.NDescriptors)*sizeOfFillQueueDesc()),
unix.PROT_READ|unix.PROT_WRITE,
unix.MAP_SHARED|unix.MAP_POPULATE,
uintptr(sockfd),
unix.XDP_UMEM_PGOFF_FILL_RING,
)
if err != nil {
return nil, fmt.Errorf("failed to mmap fill queue: %v", err)
}
cleanup.Add(func() {
memutil.UnmapSlice(fillQueueMem)
})
// Setup the fillQueue with offsets into allocated memory.
cb.Fill = FillQueue{
mem: fillQueueMem,
mask: opts.NDescriptors - 1,
cachedConsumer: opts.NDescriptors,
}
cb.Fill.init(off, opts)
// Allocate space for the completion queue.
completionQueueMem, err := memutil.MapSlice(
0,
uintptr(off.Cr.Desc+uint64(opts.NDescriptors)*sizeOfCompletionQueueDesc()),
unix.PROT_READ|unix.PROT_WRITE,
unix.MAP_SHARED|unix.MAP_POPULATE,
uintptr(sockfd),
unix.XDP_UMEM_PGOFF_COMPLETION_RING,
)
if err != nil {
return nil, fmt.Errorf("failed to mmap completion queue: %v", err)
}
cleanup.Add(func() {
memutil.UnmapSlice(completionQueueMem)
})
// Setup the completionQueue with offsets into allocated memory.
cb.Completion = CompletionQueue{
mem: completionQueueMem,
mask: opts.NDescriptors - 1,
}
cb.Completion.init(off, opts)
// Allocate space for the RX queue.
rxQueueMem, err := memutil.MapSlice(
0,
uintptr(off.Rx.Desc+uint64(opts.NDescriptors)*sizeOfRXQueueDesc()),
unix.PROT_READ|unix.PROT_WRITE,
unix.MAP_SHARED|unix.MAP_POPULATE,
uintptr(sockfd),
unix.XDP_PGOFF_RX_RING,
)
if err != nil {
return nil, fmt.Errorf("failed to mmap RX queue: %v", err)
}
cleanup.Add(func() {
memutil.UnmapSlice(rxQueueMem)
})
// Setup the rxQueue with offsets into allocated memory.
cb.RX = RXQueue{
mem: rxQueueMem,
mask: opts.NDescriptors - 1,
}
cb.RX.init(off, opts)
// Allocate space for the TX queue.
txQueueMem, err := memutil.MapSlice(
0,
uintptr(off.Tx.Desc+uint64(opts.NDescriptors)*sizeOfTXQueueDesc()),
unix.PROT_READ|unix.PROT_WRITE,
unix.MAP_SHARED|unix.MAP_POPULATE,
uintptr(sockfd),
unix.XDP_PGOFF_TX_RING,
)
if err != nil {
return nil, fmt.Errorf("failed to mmap tx queue: %v", err)
}
cleanup.Add(func() {
memutil.UnmapSlice(txQueueMem)
})
// Setup the txQueue with offsets into allocated memory.
cb.TX = TXQueue{
sockfd: uint32(sockfd),
mem: txQueueMem,
mask: opts.NDescriptors - 1,
cachedConsumer: opts.NDescriptors,
}
cb.TX.init(off, opts)
// In some cases we don't call bind, as we're not in the netns with the
// device. In those cases, another process with the same socket will
// bind for us.
if opts.Bind {
if err := Bind(sockfd, ifaceIdx, queueID, opts.UseNeedWakeup); err != nil {
return nil, fmt.Errorf("failed to bind to interface %d: %v", ifaceIdx, err)
}
}
cleanup.Release()
return &cb, nil
}
// Bind binds a socket to a particular network interface and queue.
func Bind(sockfd int, ifindex, queueID uint32, useNeedWakeup bool) error {
var flags uint16
if useNeedWakeup {
flags |= unix.XDP_USE_NEED_WAKEUP
}
addr := unix.SockaddrXDP{
// XDP_USE_NEED_WAKEUP lets the driver sleep if there is no
// work to do. It will need to be woken by poll. It is expected
// that this improves performance by preventing the driver from
// burning cycles.
//
// By not setting either XDP_COPY or XDP_ZEROCOPY, we instruct
// the kernel to use zerocopy if available and then fallback to
// copy mode.
Flags: flags,
Ifindex: ifindex,
// AF_XDP sockets are per device RX queue, although multiple
// sockets on multiple queues (or devices) can share a single
// UMEM.
QueueID: queueID,
// We're not using shared mode, so the value here is irrelevant.
SharedUmemFD: 0,
}
return unix.Bind(sockfd, &addr)
}