snapshot: sagernet/gvisor v0.0.0-20250811.0-sing-box-mod.1

Содержимое пина, зафиксированного в go.mod sing-box-lx, одним коммитом
без истории. Полная история SagerNet/gvisor — 1.45 ГБ и клонируется в
каждой CI-джобе; наша дельта — одна вставка в одну функцию, история для
неё не нужна.

Module path github.com/sagernet/gvisor сохранён намеренно: на него
опирается replace-директива суперпроекта.

Патч поверх — отдельным коммитом, чтобы дельта читалась одним git show
и переносилась на новый пин копированием.

SPECS/TASKS/048-GVISOR_HANDSHAKE_NIL_CRASH

pkg/tcpip/header/arp.go

@@ -0,0 +1,127 @@
+// Copyright 2018 The gVisor Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package header
+
+import (
+	"encoding/binary"
+
+	"github.com/sagernet/gvisor/pkg/tcpip"
+)
+
+const (
+	// ARPProtocolNumber is the ARP network protocol number.
+	ARPProtocolNumber tcpip.NetworkProtocolNumber = 0x0806
+
+	// ARPSize is the size of an IPv4-over-Ethernet ARP packet.
+	ARPSize = 28
+)
+
+// ARPHardwareType is the hardware type for LinkEndpoint in an ARP header.
+type ARPHardwareType uint16
+
+// Typical ARP HardwareType values. Some of the constants have to be specific
+// values as they are egressed on the wire in the HTYPE field of an ARP header.
+const (
+	ARPHardwareNone ARPHardwareType = 0
+	// ARPHardwareEther specifically is the HTYPE for Ethernet as specified
+	// in the IANA list here:
+	//
+	// https://www.iana.org/assignments/arp-parameters/arp-parameters.xhtml#arp-parameters-2
+	ARPHardwareEther    ARPHardwareType = 1
+	ARPHardwareLoopback ARPHardwareType = 2
+)
+
+// ARPOp is an ARP opcode.
+type ARPOp uint16
+
+// Typical ARP opcodes defined in RFC 826.
+const (
+	ARPRequest ARPOp = 1
+	ARPReply   ARPOp = 2
+)
+
+// ARP is an ARP packet stored in a byte array as described in RFC 826.
+type ARP []byte
+
+const (
+	hTypeOffset                 = 0
+	protocolOffset              = 2
+	haAddressSizeOffset         = 4
+	protoAddressSizeOffset      = 5
+	opCodeOffset                = 6
+	senderHAAddressOffset       = 8
+	senderProtocolAddressOffset = senderHAAddressOffset + EthernetAddressSize
+	targetHAAddressOffset       = senderProtocolAddressOffset + IPv4AddressSize
+	targetProtocolAddressOffset = targetHAAddressOffset + EthernetAddressSize
+)
+
+func (a ARP) hardwareAddressType() ARPHardwareType {
+	return ARPHardwareType(binary.BigEndian.Uint16(a[hTypeOffset:]))
+}
+
+func (a ARP) protocolAddressSpace() uint16 { return binary.BigEndian.Uint16(a[protocolOffset:]) }
+func (a ARP) hardwareAddressSize() int     { return int(a[haAddressSizeOffset]) }
+func (a ARP) protocolAddressSize() int     { return int(a[protoAddressSizeOffset]) }
+
+// Op is the ARP opcode.
+func (a ARP) Op() ARPOp { return ARPOp(binary.BigEndian.Uint16(a[opCodeOffset:])) }
+
+// SetOp sets the ARP opcode.
+func (a ARP) SetOp(op ARPOp) {
+	binary.BigEndian.PutUint16(a[opCodeOffset:], uint16(op))
+}
+
+// SetIPv4OverEthernet configures the ARP packet for IPv4-over-Ethernet.
+func (a ARP) SetIPv4OverEthernet() {
+	binary.BigEndian.PutUint16(a[hTypeOffset:], uint16(ARPHardwareEther))
+	binary.BigEndian.PutUint16(a[protocolOffset:], uint16(IPv4ProtocolNumber))
+	a[haAddressSizeOffset] = EthernetAddressSize
+	a[protoAddressSizeOffset] = uint8(IPv4AddressSize)
+}
+
+// HardwareAddressSender is the link address of the sender.
+// It is a view on to the ARP packet so it can be used to set the value.
+func (a ARP) HardwareAddressSender() []byte {
+	return a[senderHAAddressOffset : senderHAAddressOffset+EthernetAddressSize]
+}
+
+// ProtocolAddressSender is the protocol address of the sender.
+// It is a view on to the ARP packet so it can be used to set the value.
+func (a ARP) ProtocolAddressSender() []byte {
+	return a[senderProtocolAddressOffset : senderProtocolAddressOffset+IPv4AddressSize]
+}
+
+// HardwareAddressTarget is the link address of the target.
+// It is a view on to the ARP packet so it can be used to set the value.
+func (a ARP) HardwareAddressTarget() []byte {
+	return a[targetHAAddressOffset : targetHAAddressOffset+EthernetAddressSize]
+}
+
+// ProtocolAddressTarget is the protocol address of the target.
+// It is a view on to the ARP packet so it can be used to set the value.
+func (a ARP) ProtocolAddressTarget() []byte {
+	return a[targetProtocolAddressOffset : targetProtocolAddressOffset+IPv4AddressSize]
+}
+
+// IsValid reports whether this is an ARP packet for IPv4 over Ethernet.
+func (a ARP) IsValid() bool {
+	if len(a) < ARPSize {
+		return false
+	}
+	return a.hardwareAddressType() == ARPHardwareEther &&
+		a.protocolAddressSpace() == uint16(IPv4ProtocolNumber) &&
+		a.hardwareAddressSize() == EthernetAddressSize &&
+		a.protocolAddressSize() == IPv4AddressSize
+}