snapshot: sagernet/gvisor v0.0.0-20250811.0-sing-box-mod.1

Содержимое пина, зафиксированного в go.mod sing-box-lx, одним коммитом
без истории. Полная история SagerNet/gvisor — 1.45 ГБ и клонируется в
каждой CI-джобе; наша дельта — одна вставка в одну функцию, история для
неё не нужна.

Module path github.com/sagernet/gvisor сохранён намеренно: на него
опирается replace-директива суперпроекта.

Патч поверх — отдельным коммитом, чтобы дельта читалась одним git show
и переносилась на новый пин копированием.

SPECS/TASKS/048-GVISOR_HANDSHAKE_NIL_CRASH

pkg/safecopy/sighandler_amd64.s

@@ -0,0 +1,147 @@
+// Copyright 2018 The gVisor Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "textflag.h"
+
+// The signals handled by sigHandler.
+#define SIGBUS  7
+#define SIGSEGV 11
+
+// Offsets to the registers in context->uc_mcontext.gregs[].
+#define REG_RDI 0x68
+#define REG_RAX 0x90
+#define REG_IP  0xa8
+
+// Offset to the si_addr field of siginfo.
+#define SI_CODE 0x08
+#define SI_ADDR 0x10
+
+// signalHandler is the signal handler for SIGSEGV and SIGBUS signals. It must
+// not be set up as a handler to any other signals.
+//
+// If the instruction causing the signal is within a safecopy-protected
+// function, the signal is handled such that execution resumes in the
+// appropriate fault handling stub with AX containing the faulting address and
+// DI containing the signal number. Otherwise control is transferred to the
+// previously configured signal handler (savedSigSegvHandler or
+// savedSigBusHandler).
+//
+// This function cannot be written in go because it runs whenever a signal is
+// received by the thread (preempting whatever was running), which includes when
+// garbage collector has stopped or isn't expecting any interactions (like
+// barriers).
+//
+// The arguments are the following:
+// DI - The signal number.
+// SI - Pointer to siginfo_t structure.
+// DX - Pointer to ucontext structure.
+TEXT ·signalHandler(SB),NOSPLIT|NOFRAME,$0
+	// Check if the signal is from the kernel.
+	MOVQ $0x0, CX
+	CMPL CX, SI_CODE(SI)
+	JGE original_handler
+
+	// Check if RIP is within the area we care about.
+	MOVQ REG_IP(DX), CX
+	CMPQ CX, ·memcpyBegin(SB)
+	JB not_memcpy
+	CMPQ CX, ·memcpyEnd(SB)
+	JAE not_memcpy
+
+	// Modify the context such that execution will resume in the fault
+	// handler.
+	LEAQ handleMemcpyFault(SB), CX
+	JMP handle_fault
+
+not_memcpy:
+	CMPQ CX, ·memclrBegin(SB)
+	JB not_memclr
+	CMPQ CX, ·memclrEnd(SB)
+	JAE not_memclr
+
+	LEAQ handleMemclrFault(SB), CX
+	JMP handle_fault
+
+not_memclr:
+	CMPQ CX, ·swapUint32Begin(SB)
+	JB not_swapuint32
+	CMPQ CX, ·swapUint32End(SB)
+	JAE not_swapuint32
+
+	LEAQ handleSwapUint32Fault(SB), CX
+	JMP handle_fault
+
+not_swapuint32:
+	CMPQ CX, ·swapUint64Begin(SB)
+	JB not_swapuint64
+	CMPQ CX, ·swapUint64End(SB)
+	JAE not_swapuint64
+
+	LEAQ handleSwapUint64Fault(SB), CX
+	JMP handle_fault
+
+not_swapuint64:
+	CMPQ CX, ·compareAndSwapUint32Begin(SB)
+	JB not_casuint32
+	CMPQ CX, ·compareAndSwapUint32End(SB)
+	JAE not_casuint32
+
+	LEAQ handleCompareAndSwapUint32Fault(SB), CX
+	JMP handle_fault
+
+not_casuint32:
+	CMPQ CX, ·loadUint32Begin(SB)
+	JB not_loaduint32
+	CMPQ CX, ·loadUint32End(SB)
+	JAE not_loaduint32
+
+	LEAQ handleLoadUint32Fault(SB), CX
+	JMP handle_fault
+
+not_loaduint32:
+	CMPQ CX, ·checkXstateBegin(SB)
+	JB not_checkXstate
+	CMPQ CX, ·checkXstateEnd(SB)
+	JAE not_checkXstate
+
+	LEAQ handleCheckXstateFault(SB), CX
+	JMP handle_fault
+not_checkXstate:
+original_handler:
+	// Jump to the previous signal handler, which is likely the golang one.
+	XORQ CX, CX
+	MOVQ ·savedSigBusHandler(SB), AX
+	CMPL DI, $SIGSEGV
+	CMOVQEQ ·savedSigSegVHandler(SB), AX
+	JMP AX
+
+handle_fault:
+	// Entered with the address of the fault handler in RCX; store it in
+	// RIP.
+	MOVQ CX, REG_IP(DX)
+
+	// Store the faulting address in RAX.
+	MOVQ SI_ADDR(SI), CX
+	MOVQ CX, REG_RAX(DX)
+
+	// Store the signal number in EDI.
+	MOVL DI, REG_RDI(DX)
+
+	RET
+
+// func addrOfSignalHandler() uintptr
+TEXT ·addrOfSignalHandler(SB), $0-8
+	MOVQ	$·signalHandler(SB), AX
+	MOVQ	AX, ret+0(FP)
+	RET